Maintenance Tips - Ecom j2kn pro Operating Instructions Manual

14. Maintenance tips

Do not use other sensors or feelers from other manu-
facturers otherwise the TÜV approval
will not be valid anymore!
To secure the accuracy of your measuring instrument we recom-
mend the annual check by an authorized ecom partner. In the case
of strong demand (e.g. permanent several hours of measurement
per day, rough conditions etc.) shorter intervals between checks
should be selected - please contact your ecom partner. All ecom
partners are listed under www.rbr.de.The following advices will be of
help for the daily check and maintenance of single parts or assem-
blies:
Service made by service centres not authorised by
rbr-Messtechnik GmbH will result in a complete and
immediate lost of any warranty!
Fine dust filter (condensate trap/gas cooler)
Screw off the cover of the condensate trap/gas cooler and check the
state of the particle filter. Change it once the filter has a grey colour
(number 2-3 of the soot comparison scale).
Fine dust filter
pro
ecom-J2KN Page 45