Option 1Ee - Source Module Connector And Extension; Cable; Mechanical Options; Option 1Cm - Rack Mount Kit Without Handles - HP 83751A User Manual

Option 1EE - Source
Module Connector and
Extension Cable
Option ICM Rack Mount
Ordering Option ICM adds a rack mount kit without handles. The HP part
Kit without Handles
Option 1CP - Rack Mount
Kit with Handles
Option AX2 - Portable
Handle and Front-panel
Cover
Specifications and Options
Options
If Option IEE is ordered, source module interfacing hardware is added.
This includes a connector on the rear panel and an extension cable that
allows the mm-wave module to be positioned in front of the sweeper. This
option provides direct frequency and power level control of HP 83550 series
millimeter-wave source modules from the front panel of the sweeper. HP
source modules. High power sweeper models HP 83751B and HP 83752B can
directly drive source modules.
There are three mechanical options available for the sweeper. If these options
were not ordered with the original shipment, and are now desired, they can
be ordered from the nearest Hewlett-Packard office using the part numbers
included in each of the following descriptions.
number for the rack mount kit without handles is 5062-3977.
Ordering Option 1CP adds a rack mount kit with handles. The HP part
number for the rack mount kit with handles is 5062-3983.
Ordering Option AX2 adds tilt-bail handle, rubber bumpers, rear feet and a
protective front panel cover for Eeld test applications where portability is
desired. Complies with MLT-28800E Class 5 Style D. The HP part number
for the portability kit is 5063-0092.
17-20