HP 83751A User Manual page 105

Instrument State Keys
Pressing the (SAVE) key stores the current instrument state into one of nine
registers.
When this key is pressed, the prompt message in the right-hand display of
the sweeper is
keyboard, the display becomes
stored in that register. Note that a unit key (i.e. [Hz/5/ENTER)) does
to be pushed. Successive numbers
multiple registers. Pressing @ has no effect.
SV <n>
instrument state is saved into the user-defined preset storage register. The
right-hand display shows Preset. Saued.
N O T E
When the instrument is connected to an HP 87570 scalar network analyzer, its system interface must
be temporarily turned OFF in order to save a user-defined preset instrument state. Refer to the
HP 87570 Scalar Network Analyzer Operating Reference.
8 - 6
be pushed to store the instrument into
can
Associated SCPI Commands
Saves the instrument state into
Associated 8350 Commands
register -cc-.
is
instrument state
need
not
current