Selecting this function (by pressing cm) (STOP_)) makes the frequency
multiplier the active parameter displayed in the MARKER/SWEEP/STATUS
area. If the multiplier is not 1, the
values of frequency shown in the FREQUENCY display are in accordance with
the equation:
DisplayedFrequency= (ActualRFFrequency * Multiplier) + Offset
The multiplier value is displayed in the format
The value must be an integer between 1 and 36. There are no units. The
multiplier function can be turned off by selecting lsHlFTJ MULT again, or by
setting the multiplier to 1.
MULT
annunciator is turned on. The
I PL I ER=<d i q i t. s>.
Associated SCPI Commands
Sets the fiequenq mult@er to the
desired value.
Turns the frequency mult@Ler
function on.
Turns the frequency muittjiter
OFF
function ofi
Associated 8350 Commands
Sets the frequency muit@er to the
desired value.
Frequency Keys
11-7