MPO
This function copies the values of the markers Ml and M2 to the START
and STOP frequencies respectively. The new frequencies are then shown in
the FREQUENCY displays. Markers Ml and M2 are turned oli if they were
previously off. Also, if Ml-M2 Sweep mode is on, it will be automatically
turned off when this function is selected.
N O T E
If the value of Ml is greater than the value of M2, the values will be interchanged when they are put
into the start and stop frequencies. However, the values stored in Ml and M2 will not change.
SHMP
Associated 8350 Commands
Turns marker sweep off
Associated SCPI Commands
Transfers values of Ml and I%?? to
the start and stop frequencies.
Associated 8350 Commands
Transfers values of Ml and M.? to
the start and stop frequencbs.
Frequency Keys
1 1 - 1 3