HP 83751A User Manual page 107

Instrument State Keys
Pressing this key restores the state of the instrument from a register (l-9).
When this key is pressed, the prompt message in the right-hand display is
display shows
that register. Note that a units key (i.e. (j-1) does not need to be
pushed. Successive numbers can be pushed to recall instrument state from
multiple registers. Entry key @J has no effect.
*RCL <n>
RC <n>
When this function is selected (by pressing [SHIFT) [?ZZXLiI]) the special
functions menu is accessed.
When this key is pressed, the last-used special function is displayed in the
form <number> <function>. (If no special functions have been accessed
since the instrument was last preset, the last-used special function will
1 13h::F HUTI:I.)
default to
used to scroll through the list of available functions in the menu; or the
number of the desired special function can be entered from the keypad.
When the desired special function is displayed, pressing the CHz/s/ENTER)
key causes the function to become the active parameter displayed in the
MARKER/SWEEP/STATUS display. Pressing the (FJ key returns the last
menu item in the form <number> <function>.
and the instrument state is recalled from
Associated SCPI Commands
Associated 8350 Commands
The @ a keys or the front panel knob can be
Restores the state of the instrument
from register -cn>.
Restores the state of the instrument
from register 00.