HP 83751A User Manual page 116

M
MA <num>[suffix]
marker output format is displayed. The mode can be changed to the next
choice by pressing the @ @J keys, or by selecting (?FiiFi~ MKR
The marker output format choices are:
In this mode the on markers appear as a rise of about
Amplitude
1 dl3 in the output power. The displayed message is
In this mode the on markers appear as a -5V pulse at the
Intensity
Z-AXIS BLANK/MKRS rear panel output connector. The
displayed message is
N O T E
The Z-axis markers are always on, so it is not possible to have amplitude markers on, and intensity
markers off.
Associated SCPI Commands
Same as pressing the [MKR n] ker
Enters fiequenq of marke/:
Associated 8350 Commands
Same as pressing [[MKR nJ kel
Used to set marker 0.
Marker Keys
MODE
again.
9 - 5