Language - HP 83751A User Manual

Special Functions
This function allows you to select the instrument programming language:
either SCPI or HP 8350 compatible.
N O T E
Your language selection may or may not be retained if line power to the instrument is lost, depending
upon the rear-panel language selection switch. For information on setting the rear panel switch refer
to the "HP-I!3 Switch" section of Chapter 7 in this manual,
for more detailed instructions on setting this switch.
Guide
SYStem:LANGuage
SYStem:LANGuage
1 5 - 2 0
or refer to the
Associated SCPI Commands
Sets the instrument programming
SCPI
language to SCPI.
Sets the instrument programming
COMP
language to HP 8350 compatible.