Table of Contents
Advertisement
Special Functions
17 -*SECURITY
402 CLRMEM This function lets you set the number of times that the RAMS will be cleared
When you press @FiiF) SPECIAL @ [Hz/s/ENTER_), the following message is
displayed: C It-Mem Courtt.= 1. The 0) (7JJ keys or the front panel knob let
you change the count. Or use the numeric keypad to enter the new value.
Numbers between and including 1 through 20 are accepted.
The clear memory count is reset to a value of one at preset or when power is
cycled on the instrument.
403 SAVE This function allows you to enable or disable the CRAVE) function. When the
registers using the LSAVE) key. When the function is disabled, you cannot
save instrument states, and the message
MARKER/SWEEP/STATUS display if you attempt to do so.
When your instrument was shipped, the save function was enabled.
When you press [SHIFT_) SPECIAL @
displayed:
you toggle between enabled and disabled.
If you disable this function, it will stay disabled (through presets and power
cycles) until you enable it again using this special function.
15-24
Associated SCPI Commands
SYSTem:SECurity: COUNt <nun>
Associated SCPI Commands
SYSTem:KEY:ENABle
SYSTem:KEY:DISaBle
MIN
MAX
/
/
Z
S
E N T E R
The 0J @) keys or the front panel knob let
SAVE
SAVE
Sets the numberoftimes that
! ! will appear in the
, the following message is
Hide quick links:
Advertisement
Table of Contents
