HP 83751A User Manual page 212

Error Messages
Error Error Description [description/explanation/examples]
Number
"Execution error"
-200
This is the generic syntax error for devices that cannot detect more
defined in IEEE 488.2, 11.5.1.1.5 has occurred.
-201 "Invalid while in local"
Indicates that a command is not executable while the device is in
local due to a hard local control. (See IEEE 488.2, 5.6.1.5); for
example, a device with a rotary switch receives a message which
would change the switches state, but the device is in local so the
message cannot be executed.
-202 "Settings lost due to rtl"
Indicates that a setting associated with a hard local control. (See
IEEE 488.2, 5.6.15); was lost when the device changed to LOCS
from REMS or to LWLS from RWLS.
-210 "Trigger error"
A trigger error occurred in the signal generator.
-211 "Trigger ignored"
Indicates that a GET, *TRG, or triggering signal was received and
recognized by the device but was ignored because of device timing
considerations; for example, the device was not ready to respond.
Note: a DTO device always ignores GET and treats *TRG as a
Command Error.
-212 "Arm ignored"
Indicates that an arming signal was received and recognized by the
device but was ignored.
-213
Indicates that a request for a measurement initiation was ignored
as another measurement was already in progress.
16-14