Connecting The Board For I/O Operations; Connectors, Cables - Main I/O Connector - Measurement Computing PCI-DAC6702 User Manual

PCI-DAC6702 and PCI-DAC6703 User's Guide

Connecting the board for I/O operations

Connectors, cables – main I/O connector
Table 2-1 lists the board connectors, applicable cables, and compatible accessory products for the PCI-
DAC6700 Series.
Table 2-1. Board connectors, cables, and accessory equipment
Connector type
Compatible cables
Compatible accessory products with
the C100HD50-x cable
Compatible accessory products with
the C100MMS-x cable
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections. This document is available on our web site at
http://www.measurementcomputing.com/signals/signals.pdf.
Shielded, SCSI 100-pin D-type
C100HD50-x unshielded round cable. x = 3 or 6 feet. (Figure 2-1)
C100MMS-x shielded round cable. x = 1, 2, or 3 meters. (Figure 2-2)
BNC-16SE
BNC-16DI
CIO-MINI50
CIO-TERM100
SCB-50
SCB-100
BNC-DI-FE
2-4
Installing the PCI-DAC6700 Series