Table of Contents
Advertisement
OIL NOZZLE AND OIL JET
REMOVAL
• Remove the oil nozzle
CD
and oil jet
@
of the right
crankcase.
I
A
CAUTION
I
The removed oil jet
@
should be replaced with a new
one.
INSPECTION
Check the oil nozzle for any damage or clogging.
REASSEMBLY
• Install the new oil jet
@
as shown in the illustration.
• Install the oil nozzle
CD.
• Apply THREAD LOCK SUPER "1303" to the bolt and
tighten to the specified torque.
~a 99000-32030: THREAD LOCK SUPER
"1303"
~
Bolt: 10 N·m (1.0 kg-m, 7.0 Ib-ft)
CRANKCASE BEARINGS
Inspect the play of the crankcase bearings by hand while
they are in the left and right crankcase. Rotate each crank-
case bearing inner race by hand to inspect for abnormal noise
and smooth rotation. Replace the bearing if there is anything
unusual.
NOTE:
When reassembling the bearing retainer
@,
apply a small
quantity of THREAD LOCK
"1342"
to the bearing retainer
screws and bolts.
ENGINE 3·40
Play
Play
Advertisement
Table of Contents
