Table of Contents
Advertisement
5·49 CHASSIS
REMOVAL AND DISASSEMBLY
• Loosen the front axle holder nuts
CD
and axle
@.
• Carefully position a jack under the chassis tubes and raise
until the front wheel is slightly off the ground.
• Remove the front wheel by removing the axle.
• Remove the front brake caliper mounting bolts
@.
• Remove the front brake hose clamp bolt
@
and speedom-
eter cable guide bolt
@.
• Slightly loosen the front fork cap bolt
®
after loosening
the front fork upper clamp bolt
(j)
to facilitate later disas-
sembly.
• Remove the front fork by loosening the lower clamp bolts
®.
• Remove the other side front fork the same way.
• Remove the front fork cap bolt
®,
spacer
@,
washer
@
and spring
@.
• Invert the front fork and stroke it several times to drain
fork oil.
Advertisement
Table of Contents
