Table of Contents
Advertisement
CALIPER AND DISC INSPECTION
Inspect the caliper cylinder bore wall for nicks, scratches
or other damage.
Inspect the pistons for damage and wear.
DISC ........................................... Refer to page 5-10.
CALIPER REASSEMBLY AND REMOUNTING
Reassemble and remount the caliper in the reverse order of
removal and disassembly. Pay attention to the following
points:
IA
CAUTION
I
*
Wash the caliper components with fresh brake fluid
before reassembly. Never use cleaning solvent or
gasoline to wash them.
*
Apply brake fluid to the caliper bore and piston to
be inserted into the bore.
III
Specification and classification: DOT 4
• Tighten the brake hose union bolt to the specified torque.
~
Brake hose union bolt: 23 N·m (2.3 kg-m, 16.5 Ib-ft)
IA
CAUTION
I
Bleed air from the system after reassembling the caliper.
(Refer to page 2-11.)
CHASSIS 5·36
o
. .
~
Advertisement
Table of Contents
