Table of Contents
Advertisement
5-29 CHASSIS
• Remove the brake disc by removing the mounting bolts.
INSPECTION AND DISASSEMBLY
TIRE .... _. __ ... __ .... _ .. _ ...................... Refer to page 2-12.
REAR WHEEL .............................. Refer to page 5-10.
WHEEL BEARING AND SPROCKET DRUM BEARING
Inspect the play of bearing inner ring by hand while mount-
ed in the wheel or sprocket drum. Rotate the inner ring by
hand to inspect any abnormal noise occurs or rotating
smoothly. Replace the bearing if there is anything unusual.
Remove the both bearing with the special tool in the follow-
ing procedures.
• Insert the adapter into the bearing.
,gob
09941 -50111: Bearing remover
• After inserting the wedge bar from the opposit side, lock
the wedge bar in the slit of the adapter.
• Drive out the bearing by hammering the wedge bar.
I
A
CAUTION
I
The removed bearings should be replaced with new
ones.
Play
~~F=~Play
Advertisement
Table of Contents
