Library Models; Element Numbering Convention; Table 1-1 Library Model Characteristics - Sun Microsystems StorEdge L11000 User Manual

Library Models

The StorEdge L11000 is available in four models that support a wide range of
storage and performance requirements (
combining the number of drives and the number of storage bins in the library.
Library Model Characteristics
TABLE 1-1
StorEdge L11000 Models with 326 Bins
Characteristic
DLT tape drives 4
Storage bins 326
Storage capacity 11.4 (up to 22.8 compressed)
(in terabytes)
Throughput in 72
1 hour (in GB)
Throughput in 578
8 hours (in GB)

Element Numbering Convention

The library stores tape cartridges in the following locations:
170 storage bins on the back wall
96 storage bins on the inside of the left door
60 storage bins on the inside of the right door
One load port consisting of two 6-cartridge magazines
16 tape drives
shows the storage bin, load port bin, and tape drive numbering
FIGURE 1-2
conventions. These conventions are used by the library GUI and the diagnostic
software program.
TABLE 1-1
4/326 8/326 12/326
8 12
326 326
144 216
1152 1728
). Model numbers are created by
16/326
16
326
288
2304
Chapter 1 Library Description 3