Auto Trigger Settings; Regulatory Compliance; Laser Safety; Product Safety - Opticon OPR 3101 Specification Manual

14.3. Auto Trigger Settings

Functions
SET
Disable auto trigger
Enable auto trigger
END

15. Regulatory Compliance

15.1. Laser Safety

The scanner emits laser beams.
JIS C6802: 2005: Laser class 2
IEC 825-1/EN 60825-1: Laser class 2
FDA CDRH Laser class II. Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50 dated June 24, 2007.
Class II laser devices are not considered to be hazardous when used for their intended
purpose. Avoid staring into the laser beam.

15.2. Product Safety

EN60950-1: 2001
IEC60950-1: 2001

15.3. EMC

EN55022
EN55024
VCCI Class B: This is a Class B product, to be used in a domestic environment based on
the Technical Requirement of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used near a radio or television
receiver in a domestic environment, it may cause radio interference. Please install and
use the equipment according to the instruction manual.
FCC Part 15 Subpart B Class B: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

15.4. RoHS

RoHS: The restriction of the use of certain hazardous substances in electrical and
electronic equipment, 2002/95 EC.
Menu labels Menu codes
_ZZ_
ZZ
_+F_ +F
_+I_
+I
_ZZ_ ZZ
32
Opticon
OPR 3101
Specifications Manual