Regulatory Compliance; Laser / Led Safety; Led Safety; Emc - Opticon OPI 2201 Specification Manual

18. Regulatory Compliance

18.1. Laser / LED Safety

The OPI 2201 is considered as a class 2M laser/LED product.
Laser / LED Safety
18.1.1.
The scanner emits laser beams.
JIS C6802: 2005: Laser class 2
IEC 825-1/EN 60825-1: Laser class 2
FDA CDRH Laser class II. Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50 dated June 24, 2007.
Class II laser devices are not considered to be hazardous when used for their intended
purpose. Avoid staring into the laser beam.

LED Safety

18.1.2.
All LED-based products are LED class 1M and are safe under reasonably foreseeable
operating conditions. Do not stare into the beam.
JIS C6802: 2005: Class 1M
IEC 60825-1+A2: 2001 Class 1M

18.2. EMC

EN55022
EN55024
VCCI Class B: This is a Class B product, to be used in a domestic environment based on
the Technical Requirement of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used near a radio or television
receiver in a domestic environment, it may cause radio interference. Please install and
use the equipment according to the instruction manual.
FCC Part 15 Subpart B Class B: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

18.3. RoHS

RoHS: The restriction of the use of certain hazardous substances in electrical and
electronic equipment, 2002/95 EC.
56
Opticon
OPI 2201
Specifications Manual