About Programming
AF-650 GP™ Design and Installation Guide
5.6 Remote Programming with DCT-10
GE has a software program available for developing,
storing, and transferring frequency converter programming.
The DCT-10 allows the user to connect a PC to the
frequency converter and perform live programming rather
than using the keypad. Also, all frequency converter
programming can be done off-line and downloaded to the
frequency converter. Or the entire frequency converter
profile can be loaded onto the PC for back-up storage or
analysis.
The USB connector or RS485 terminal is available for
connecting to the frequency converter.
5
5
For more details, go to www.geelectrical.com/drives
MG35M402
DET-767c All rights reserved.
47