GE AF-650 GP Design And Installation Manual page 123

Specifications
AF-650 GP
Heavy duty/Light duty*
Typical shaft output at 400 V [kW]
Typical shaft output at 460 V [hp]
Typical shaft output at 500 V [kW]
IP21/NEMA 1 Drive Type
IP54/NEMA 12 drive type
IP00 Open Chassis Drive Type
Output current
Continuous (at 400 V) [A]
Intermittent (60 s overload)
(at 400 V) [A]
Continuous (at 460/500 V) [A]
Intermittent (60 s overload)
(at 460/500 V) [A]
Continuous kVA (at 400 V) [kVA]
Continuous kVA (at 460 V) [kVA]
Continuous kVA (at 500 V) [kVA]
Maximum input current
Continuous (at 400 V ) [A]
Continuous (at 460/500 V) [A]
Max. cable size, mains, motor and load
2
share [mm (AWG)]
Max. cable size, brake [mm
Max. external mains fuses [A]
Estimated power loss at 400 V [W]
Estimated power loss at 460 V [W]
Weight, Unit Size IP21, IP54 [kg/(lb)]
Weight, Unit Size IP00 [kg/(lb)]
5)
Efficiency
Output frequency
Heatsink overtemp. trip [° C/(° F)]
Control card ambient trip [° C/(° F)]
* Heavy Duty=160% torque during 60 s, Light Duty=110% torque during 60 s.
Table 13.8 Technical Specifications, Unit Size 5x 380–500 V
1) American Wire Gauge.
3 13
2) Wiring terminals on N132, N160, and P315 frequency converters cannot receive cables one size larger.
3) For fuse ratings, see chapter 13.3 Fuse Specifications.
4) Typical power loss is at normal conditions and expected to be within
values are based on a typical motor efficiency (IE/IE3 border line). Lower efficiency motors add to the power loss in the frequency converter.
Applies for dimensioning of frequency converter cooling. If the switching frequency is higher than the default setting, the power losses may
increase. Keypad and typical control card power consumptions are included.Options and customer load can add up to 30 W to the losses, though
usually a fully loaded control card and options for slots A and B each add only 4 W.
5) Measured using 5 m (16.4 ft) screened motor cables at rated load and rated frequency.
Efficiency measured at nominal current. For energy efficiency class, see chapter 13.2 General Technical DataEnvironment.
120
HD
315
450
355
600
900
540
810
416
430
468
590
531
4x240 (4x500 mcm)
1)2)
2 1)
2x185 (2x350 mcm)
(AWG)
3)
4) 5)
6794
4)5)
6118
DET-767c All rights reserved.
450 hp
LD HD
355 355
500 500
400 400
51
51
52
658 658
724 987
590 590
649 885
456 456
470 470
511 511
647 647
580 580
4x240 (4x500 mcm)
2x185 (2x350 mcm)
900
7532 7498
6724 6672
270 (595)
234 (516)
0-590 Hz
110 (230)
85 (185)
±
15% (tolerance relates to variety in voltage and cable conditions.) These
500 hp
LD HD
400 400
600 550
500 500
51
51
52
745 695
820 1043
678 678
746 1017
516 482
540 540
587 587
733 684
667 667
4x240 (4x500 mcm)
2x185 (2x350 mcm)
900
8677 7976
7819 7814
272 (600) 313 (690)
236 (520) 277 (611)
0.98
550 hp
LD
450
600
530
51
51
52
800
880
730
803
554
582
632
787
718
900
9473
8527
MG35M402