GE AF-650 GP Design And Installation Manual page 53

Application Set-Up Examples
6 6
Table 6.7 Speed Reference (using a Manual Potentiometer)
Table 6.8 Speed Up/Speed Down
50
Parameters
Function Setting
Parameter AN-10
Terminal 53 Low
Voltage 0.07 V*
Parameter AN-11 10 V*
Terminal 53 High
Voltage
Parameter AN-14 0 RPM
Terminal 53 Low
Ref./Feedb. Value
Parameter AN-15 1500 RPM
Terminal 53 High
Ref./Feedb. Value
* = Default Value
Notes/comments:
Parameters
Function Setting
[8] Start*
Parameter E-01 T
erminal 18
Digital Input
Parameter E-03 T [19] Freeze
erminal 27 Reference
Digital Input
Parameter E-04 T [21] Speed
erminal 29 Up
Digital Input
Parameter E-05 T [22] Speed
erminal 32 Down
Digital Input
* = Default Value
Notes/comments:
DET-767c All rights reserved.
Illustration 6.3 Illustration for Table 6.8
Parameter O-30 P
rotocol
Parameter O-31
Address
Parameter O-32
Drive Port Baud
Rate
* = Default Value
Notes/comments:
Select protocol, address, and
baud rate in the above
mentioned parameters.
Table 6.9 RS485 Network Connection
Parameters
Function Setting
Modbus*
1*
9600*
MG35M402