Introduction
1.1.1 Extended Options Cabinets
If a frequency converter is ordered with brake chopper, it is
supplied with an options cabinet that makes it taller.
Options unit
Extension cabinets
designations
45h
41h enclosure with
short extension
47h
42h enclosure with
short extension
Table 1.1 Overview of Extended Options
The 47h include a 200 mm pedestal for floor mounting.
Illustration 1.8 47h Enclosure
MG35M402
AF-650 GP™ Design and Installation Guide
1.2 Purpose of the Manual
This manual provides detailed information for the instal-
lation and start-up of the frequency converter.
Chapter 2 Installation provides requirements for mechanical
and electrical installation, including:
Possible options
Brake
Brake
Chapter 3 Start-up and Functional Testing provides detailed
procedures for:
The remaining chapters provide supplementary details.
These details include:
1.3 Additional Resources
Other resources are available to understand advanced
frequency converter functions and programming.
DET-767c All rights reserved.
•
Input
•
Motor
•
Control wiring
•
Serial communication wiring
•
Control terminal functions
•
Start-up
•
Basic operational programming
•
Functional testing
•
User interface
•
Detailed programming
•
Application examples
•
Start-up
•
Troubleshooting
•
Specifications
•
The Programming Guide, DET-618 provides greater
detail on working with parameters and many
application examples.
•
Optional equipment is available that may change
some of the procedures described. Reference the
instructions supplied with those options for
specific requirements.
1
1
13