Remote Programming With Dct-10 - GE AF-600 FP Series Design And Installation Manual

TM
About Programming
AF-600 FP Design and Installation Guide

5.6 Remote Programming with DCT-10

GE has a software program available for developing,
storing, and transferring frequency converter
programming. The DCT-10 allows the user to connect a PC
to the frequency converter and perform live programming
rather than using the keypad. Additionally, all frequency
converter programming can be done off-line and simply
downloaded to the frequency converter. Or the entire
frequency converter profile can be loaded onto the PC for
back up storage or analysis.
The USB connector or RS-485 terminal is available for
connecting to the frequency converter.
5 5
For more details, go to www.geelectrical.com/drives
42 DET-768b