Application Set-Up Examples
[Hand] [Auto] keys
Hand
Hand ⇒ Off
Auto
Auto ⇒ Off
All keys
All keys
Table 6.13 Conditions for Local/Remote Reference Activation
Parameter H-40 Configuration Mode determines what kind
of application control principle (that is, Speed, Torque, or
Process Control) is used when the remote reference is
6
6
active. Parameter H-45 Local Mode Configuration determines
the kind of application control principle that is used when
the local reference is active. One of them is always active,
but both cannot be active at the same time.
58
Parameter F-02 Op
Active reference
eration Method
Linked to Hand/
Local
Auto
Linked to Hand/
Local
Auto
Linked to Hand/
Remote
Auto
Linked to Hand/
Remote
Auto
Local
Local
Remote
Remote
DET-767c All rights reserved.
MG35M402