Electrical Installation - GE AF-650 GP Design And Installation Manual

Installation

2.5 Electrical Installation

This section contains detailed instructions for wiring the frequency converter.
The following tasks are described:
•
Wiring the motor to the frequency converter output terminals.
•
Wiring the AC mains to the frequency converter input terminals.
•
Connecting control and serial communication wiring.
•
After power has been applied, checking input and motor power; programming control terminals for their intended
functions.
Illustration 2.5 Basic Wiring Schematic Drawing
A=Analog, D=Digital
Terminal 37 is used for Safe Torque Off. Refer to Safe Torque Off Operating Instructions for further information.
*The brake chopper factory option must be ordered to use dynamic brake resistors
**The DC bus option must be ordered from factory.
MG35M402
AF-650 GP™ Design and Installation Guide
DET-767c All rights reserved.
2 2
19