Encoder Model D9040 - Cisco D9040 User And Service Manual

Encoder Model D9040

General Description
The design of the Encoder Model D9040 is compact. The D9040 Encoder is a 1U
encoder that fits into a 19-inch rack. It features single-channel High-Definition
high-quality SDI and/or composite video processing. It is targeted at uplink
distribution and contribution applications and supports MPEG-1 Layer II audio
encoding, Dolby
audio and passthrough of AAC audio.
The D9040 Encoder features advanced pre-processing for optimum performance at
low bit rates.
PreSightPlus™ combined with the Regulus™ Statistical Multiplex Controller is one
of the industry's leading solutions for bandwidth saving encoding.
The D9040 Encoder offers built-in support for SCTE35 digital program insertion
(DPI), which will be used for ad-insertion applications in the digital domain.
Transport output is provided via ASI outputs.
The D9040 Encoder has redundant power supplies which helps ensure
uninterrupted operation if one power supply should fail.
Software Update
All software in the D9040 Encoder is stored in non-volatile memory that can be
electrically programmed. New software releases for the D9040 Encoder can be
downloaded via the Ethernet 10/100 Base-T Management interface.
2-2
® Digital (AC-3) audio, passthrough of Dolby Digital audio,AAC
Introduction
4020024 Rev C