Cisco D9040 User And Service Manual page 73

System Menu,
Continued
Default
Parameters:
Description:
Reset Passwords
Parameters:
Description:
4020024 Rev C
N/A
The D9040 Encoder will display a message asking you to confirm
setting the unit to the default values. Press SELECT to set the unit to
the default values, or press UP or PREV to leave the menu without
making any changes.
Use the default settings if you have set up the D9040 Encoder with
illegal and incompatible settings to get the encoder back in a
functional state.
Note: The default may take up to 120 seconds.
N/A
Use this feature if you want to reset the login for the telnet, FTP and
web-based user interfaces. The D9040 Encoder will display a
message asking you to confirm resetting the passwords to their
default values.
Note: The Web GUI is used for diagnostics/troubleshooting
purposes only.
Press SELECT to reset the passwords, or press UP or PREV to leave
the menu without making any changes.
Front Panel Operation 4-13