Support Data Collector; Overview - Cisco ASR 5500 Administration Manual

Support Data Collector

The Support Data Collector (SDC) is a system feature that allows scheduled collection of process state,
counter, event and attribute data that may be useful when troubleshooting problems at an installation site.
This chapter includes the following sections:
•
•
•
•
•
•
•

Overview

The task of collecting the support data is performed by a background CLI task called the record collector. The
administrator configures the SDC via the CLI with the commands to be executed on a periodic basis. The
record collector always runs in the background and checks if there are records to be collected.
When it is time to collect support data, the scheduler executes the configured sequence of CLI commands and
stores the results in a gunzipped (.gz) file on the hard-disk. This file is called an SDR (Support Data Record),
and represents a snapshot of the overall state of the system at that time.
Technical Assistance Center (TAC) personnel and local administrators can review the SDRs on-line or by
transferring them off the system. They may also wish to investigate the collector state information. The figure
Overview, page 305
Configuring SDR Collection, page 306
Displaying the SDR Collection Configuration, page 306
Collecting and Storing the SDR Information, page 307
Managing Record Collection, page 307
Using SDRs to Diagnose Problems, page 309
SDR CLI Commands, page 309
C H A P T E R
ASR 5500 System Administration Guide, StarOS Release 19
22
305