Viewing License Information; Deleting A License Key; Management Card Replacement And License Keys; Managing Local-User Administrative Accounts - Cisco ASR 5500 Administration Manual

Asr 5500 system administration guide, staros release 19
Table of Contents

Advertisement

Viewing License Information

Important
Viewing License Information
To see the license detail, enter the following command from the Exec mode:
[local]

Deleting a License Key

Use the procedure below to delete the session and feature use license key from a configuration. You must be
a security administrator or administrator.
configure
no license key
exit
show license key
The output of this command should display: "No license key installed".

Management Card Replacement and License Keys

License keys are stored on a midplane EEPROM in the ASR 5500 chassis. The MIO/UMIOs share these
license keys. There is no need to swap memory cards into replacement MIO/UMIOs.

Managing Local-User Administrative Accounts

Unlike context-level administrative accounts which are configured via a configuration file, information for
local-user administrative accounts is maintained in a separate file in flash memory and managed through the
software's Shared Configuration Task (SCT). Because local-user accounts were designed to be compliant with
ANSI T1.276-2003, the system provides a number of mechanisms for managing these types of administrative
user accounts.

Configuring Local-User Password Properties

Local-user account password properties are configured globally and apply to all local-user accounts. The
system supports the configuration of the following password properties:
• Complexity: Password complexity can be forced to be compliant with ANSI T1.276-2003.
• History length: How many previous password versions should be tracked by the system.
• Maximum age: How long a user can use the same password.
• Minimum number of characters to change: How many characters must be changed in the password
ASR 5500 System Administration Guide, StarOS Release 19
108
The ICSR license key for Active and Standby chassis are uniquely coded to each chassis. Two separate
license keys are required.
host_name
show license information [ full | key [ full ] ]
#
during a reset.
Software Management Operations

Advertisement

Table of Contents
loading

Table of Contents