System Settings; Configuring A Second Management Interface - Cisco ASR 5500 Administration Manual

System Settings

It is assumed that the procedures to initially configure the system as described in Getting Started have been
completed.
Important
•
•
•
•
•
•
•
•
•
•
•
•
•

Configuring a Second Management Interface

Refer to Getting Started for instructions on configuring a system management interface on the Management
Input/Output (MIO/UMIO) card. This section provides described how to configure a second management
interface.
The commands used in the configuration examples in this section are the most likely-used commands
and/or keyword options. In many cases, other optional commands and/or keyword options are available.
Refer to the Command Line Interface Reference for complete information.
Configuring a Second Management Interface, page 31
Verifying and Saving Your Interface and Port Configuration, page 32
Configuring System Timing, page 33
Enabling CLI Timestamping, page 37
Configuring CLI Confirmation Prompts, page 37
Configuring System Administrative Users, page 39
Configuring TACACS+ for System Administrative Users, page 44
Configuring a Chassis Key, page 48
Configuring MIO/UMIO Port Redundancy, page 50
Configuring Data Processing Card Availability, page 53
Enabling Automatic Reset of FSC Fabric, page 54
Configuring ASR 5500 Link Aggregation, page 54
Configuring a Demux Card, page 61
C H A P T E R
ASR 5500 System Administration Guide, StarOS Release 19
3
31