Exec Mode Commands; Show Support Record; Delete Support Record; Show Support Collection - Cisco ASR 5500 Administration Manual

Support Data Collector
Important
For example:
[local]
Use the no support collection command to explicitly disable the collection of the SDRs. If no record section
commands are defined, the support data collector mechanism is also effectively disabled.
Use the default support collection command to enable the support data collector using the default record
sections.

Exec Mode Commands

show support record

show support record record-id [ to record-id ] [ section section_name ]
The show support record command displays a collection of SDRs. The SDRs are displayed in order from
lowest record-id to highest record-id.
Each SDR is identified by a time index called the record-id. For example, the most recent record is always
record-id 0 (filename = sdr.0.gz). The next older record is record-id 1 (filename = sdr.1.gz), and so on.
When a new record is collected it is given a record-id of 0. The previously most recent record is renamed to
record-id 1, and so on. The display includes the record-id along with the collection time-stamp.
The record-id variable identifies a single SDR. The to keyword specifies the endpoint record-id when displaying
a range of SDRs.
The section keyword displays a particular section of the record.

delete support record

delete support record record-id [ to record-id ]
The delete support records command removes an SDR with a specified record-id or all SDRs in the specified
range of record-ids.

show support collection

show support collection [ definitions ]
The show support collection command displays information on SDC activity. It display informations such
as the start time of the last scheduled collection, the duration of the last scheduled collection, whether the
collection is still in progress, etc. In addition this command lists the currently stored set of SDR record-ids,
their respective timestamps, and size of each SDR.
[local]
Record Collection Enabled
Last Collection Start Time : Monday October 21 06:29:05 PDT 2013
Last Collection End Time
Est. Collection Next Start : Monday October 21 07:29:13 PDT 2013 (40 minutes)
Support Data Records at /var/tmp/support-records/
SDR files will be stored in the /hd-raid/support/records/ directory.
host_name support collection sleep-duration minute 30 max-records 50
(config)#
host_name show support collection
#
: yes
: Monday October 21 06:29:09 PDT 2013
ASR 5500 System Administration Guide, StarOS Release 19
Exec Mode Commands
311