Cisco ASR 5500 Administration Manual page 102

Saving the Configuration
The -redundant keyword is only applicable when saving a configuration file to a local device (usb1 or
Important
usb2) that is installed on both MIO/UMIO cards. This command does not synchronize the local file system.
If you have added, modified, or deleted other files or directories to or from a local device for the active
MIO/UMIO, you must synchronize the local file system on both MIO/UMIOs. See
Systems, on page 73
To save a configuration file called system.cfg to a directory that was previously created called cfgfiles to the
flash memory on the active MIO/UMIO, enter the following command:
save configuration /flash/cfgfiles/system.cfg
save configuration sftp://administrator:secure@192.168.34.156/host_name_configs/ simple_ip.cfg
ASR 5500 System Administration Guide, StarOS Release 19
74
Verifying and Saving Your Configuration
Synchronizing File