Cisco ASR 5500 Administration Manual page 233

Congestion Control
To enable overload disconnect for the currently selected subscriber, use the following configuration example:
configure
context context_name
subscriber name subscriber_name
default overload-disconnect threshold inactivity-time dur_thresh
default overload-disconnect threshold connect-time dur_thresh
end
To disable the overload disconnect feature for this subscriber, use the following configuration example:
configure
context context_name
subscriber subscriber_name
no overload-disconnect { [threshold inactivity-time] | [threshold connect-time] }
end
Notes:
• overload-disconnect is not supported for the Call Session Control Function (CSCF) service.
Enabling Congestion Control Redirect Overload Policy
ASR 5500 System Administration Guide, StarOS Release 19
205