Connect Usb And Webcam; Connect Computer - RGBlink mini pro User Manual

Note: For general camera, there usually is a certain delay due to the processing of light-to-electricity conversion
during the filming process but the processing of MIC is relatively simple,so there will be video picture failing to
keep up with MIC audio, which is synchronization problem. Therefore, it is necessary to do audio delay setting
for the MIC audio to ensure the synchronization of the picture and the sound, which will be explained in the
introduction of "Audio Control" later.

2.5 Connect USB and Webcam

Connect the USB 3.0 port on mini-pro to computer by USB 3.0 cable (blue) and computer will
capture mini-pro USB output as a webcam source which can be pushed to Facebook,YouTube,Zoom,
Twitter and other streaming media platform.
Note:If your computer only has a Type-C port, you can use a USB-A to Type-C cable to transmit the webcam
signal. Please note that the Type-C cable you choose needs to support data transmission. The signal is
recognized in Windows and MAC system as「RGBlink USB 3.0 Capture」.

2.6 Connect Computer

Software control:connect computer and mini-pro with CAT6 cable
Record and Stream:connect mini-pro's USB-A and mini-pro's USB 3.0 port with USB3.0 cable
(Note:the color of USB3.0 port is blue)
Minimum System Requirements for macOS
● macOS 11.0 Big Sur or later
● macOS 10.15 Catalina
Minimum System Requirements for Windows
● Microsoft Windows 10 64-bit
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
13