Service And Maintenance; Maintenance; Unit Repair; Technical Support - Siemens SITRANS F MAG 6000 I Operating Instructions Manual

Service and maintenance

Under ideal conditions the flowmeter will operate continuously with no manual adjustment or
intervention required.
9.1

Maintenance

The device is maintenance-free, however, a periodic inspection according to pertinent
directives and regulations must be carried out.
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds
9.2

Unit repair

NOTICE
Repair and service must be carried out by Siemens authorized personnel only.
Note
Siemens defines flow sensors as non-repairable products.
9.3

Technical support

If you have any technical questions about the device described in these Operating
Instructions and do not find the right answers, you can contact Customer Support:
● Via the Internet using the Support Request:
● Via Phone:
– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575
Further information about our technical support is available on the Internet at
Technical support (http://support.automation.siemens.com/WW/view/en/16604318)
MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG
Support request (http://www.siemens.com/automation/support-request)
9
55