Fm Class I, Ii, Iii, Div 1 Approval; Certificates - Siemens SITRANS F MAG 6000 I Operating Instructions Manual

Safety notes

2.4 Certificates

2.3.3

FM Class I, II, III, Div 1 approval

Compact version for MAG 3100/3100 P sensors DN 15 to 300 (½" to 12")
Hazardous area
Class I, Div. 1, Group A, B, C, D
User I/O interface
Passive current Active current
(31, 32) (31, 32)
ABCD
U 28 V DC U
i O
I 100 mA I
I O
C 19.7 nF C
I O
L 36 µH L
I O
P 0.7 W P
I O
Notes from control drawing
1. The non-intrinsically safe terminals (power rail) must not be connected to a device which
uses or generates more than 250/30 Vrms or DC.
2. The installation must meet the requirements of the National Electrical Code/Canadian
Electrical Code.
3. Conduit seal is required within 460 mm (18") from MAG 6000 I in hazardous areas
(Class I, Div. 1).
The control drawings are found on the CD-ROM shipped with the device and on the Siemens
homepage at http://www.siemens.com/flowdocumentation.
See also
Control drawing (Page 99)
2.4 Certificates
Certificates are posted on the Internet and on the documentation CD-ROM shipped with the
device.
18
CD AB
30 V DC 30 V DC
87.8 mA 86.8 mA
557 nF 63 nF
18.4 mH 4.6 mH
0.66 W 0.66 W
Relay Frequency/pulse
(44, 45, 46) (56, 57)
ABCD ABCD
U 30 V DC U 28 V DC
i i
I 200 mA I 100 mA
I I
C 3.3 nF C 14.2 nF
I I
L 0 µH L 36 µH
I I
P 1.2 W P 1.2 W
I I
Profi (FISCO)
(95, 96)
ABCD
U 17.5 V DC
i
I 380 mA
I
C 0 nF
I
L 0 µH
I
P 5.32 W
I
MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG
Digital input
(77, 78)
ABCD
U 30 V DC
i
I
I
C 0 nF
I
L 0 µH
I
P 1.2 W
I