Conformity With European Directives; Conformity With Uk Directives; Product Approval And Ul Compliance - Siemens SIPART PS100 Operating Instructions Manual

Safety notes
3.1 Prerequisites for safe use
3.1.3

Conformity with European directives

The CE marking on the device shows conformity with the regulations of the following European
guidelines:
Electromagnetic com‐
patibility EMC
2014/30/EU
Atmosphère explosi‐
ble
ATEX
2014/34/EU
2011/65/EU RoHS
The directives applied can be found in the EU declaration of conformity for the associated
device.
3.1.4

Conformity with UK directives

The UKCA marking on the device shows conformity with the following UK directives:
Electromagnetic Compatibility SI 2016/1091
Explosive Atmospheres SI 2016/1107
Directive on the Restriction of the Use of Cer‐
tain Hazardous Substances SI 2012/3032
The applicable directives can be found in the UKCA declaration of conformity of the specific
device.
3.1.5

Product approval and UL compliance

Classification according to
pressure equipment direc‐
tive (PED 2014/68/EU)
CE conformity
UL conformity
16
Directive of the European Parliament and of the Council on the har‐
monization of the laws of the Member States relating to electromag‐
netic compatibility.
Directive of the European Parliament and of the Council on the har‐
monization of the laws of the Member States relating to equipment
and protective systems intended for use in potentially explosive at‐
mospheres.
Directive of the European Parliament and of the Council on the restric‐
tion of the use of certain hazardous substances in electrical and elec‐
tronic equipment
For fluid group 1 gases; fulfills requirements according to article 4, paragraph 3 (good
engineering practice SEP)
The applicable directives and applied standards can be found in the EU declaration of
conformity on the Internet.
Conformity has been proven based on US and Canadian safety requirements.
For applicable safety requirements, refer to the UL CERTIFICATE OF COMPLIANCE on
the Internet at: Certificates
certificates)
Electromagnetic Compatibility Directives 2016
Directives for Equipment and Protective Sys‐
tems Intended for use in Potentially Explosive
Atmospheres 2016
Directives on the Restriction of the Use of Cer‐
tain Hazardous Substances in Electrical and
Electronic Equipment 2012
(http://www.siemens.com/processinstrumentation/
Operating Instructions, 06/2023, A5E50188938-AF
SIPART PS100