Yamaha TF5 Service Manual page 157

7-16-2. HAAD34_MAX (INPUT)
[Contents]
The signals inputted into INPUT17-32 are outputted to
OMNI OUT 1-16.
The HA GAIN setting at that time is +66dB.
The concrete setup is as follows.
INPUT HA GAIN
INPUT17 +66dB
INPUT18 +66dB
: :
INPUT32 +66dB
[Procedure]
Push the [HAAD34_MAX] button in the MEASUREMENT
SETTING screen. TF becomes the setup mentioned above
and the following popup dialog is displayed.
<GUI>
[ HAAD34_MAX ]
INPUT 16 – 32 Max gain setting (+66dB) - > OMNI 1-16
BREAK
● Take measurements with these settings, according to
TEST SPEC "A. INPUT-OMNI OUT Gain max.".
(See page 159.) When measurement is completed, push
[BREAK] button. Popup dialog is closed and the setup is
canceled.
7-16-3. HAAD12_MIN (INPUT)
[Contents]
The signals inputted into INPUT1-16 are outputted to OMNI
OUT 1-16.
The HA GAIN setting at that time is -6dB.
The concrete setup is as follows.
INPUT HA GAIN
INPUT 1 -6dB
INPUT 2 -6dB
: :
INPUT16 -6dB
OUTPUT
g
OMNI OUT 1
g
OMNI OUT 2
:
g
OMNI OUT16
OUTPUT
g
OMNI OUT 1
g
OMNI OUT 2
:
g
OMNI OUT16
[Procedure]
Push the [HAAD12_MIN] button in the MEASUREMENT
SETTING screen. TF becomes the setup mentioned above
and the following popup dialog is displayed.
<GUI>
[ HAAD12_MIN ]
INPUT 1 – 16 Max gain setting ( -6dB) - > OMNI 1-16
BREAK
● Take measurements with these settings, according to
TEST SPEC "B. INPUT-OMNI OUT Gain min.".
(See page 159.) When measurement is completed, push
[BREAK] button. Popup dialog is closed and the setup is
canceled.
7-16-4. HAAD34_MIN (INPUT)
[Contents]
The signals inputted into INPUT17-32 are outputted to
OMNI OUT 1-16.
The HA GAIN setting at that time is -6dB.
The concrete setup is as follows.
INPUT HA GAIN
INPUT17 -6dB
INPUT18 -6dB
: :
INPUT32 -6dB
[Procedure]
Push the [HAAD34_MIN] button in the MEASUREMENT
SETTING screen. TF becomes the setup mentioned above
and the following popup dialog is displayed.
<GUI>
[ HAAD34_MIN ]
INPUT 16 – 32 Max gain setting ( -6dB) - > OMNI 1-16
BREAK
● Take measurements with these settings, according to
TEST SPEC "B. INPUT-OMNI OUT Gain min.".
(See page 159.) When measurement is completed, push
[BREAK] button. Popup dialog is closed and the setup is
canceled.
TF5/TF3/TF1
OUTPUT
g
OMNI OUT 1
g
OMNI OUT 2
:
g
OMNI OUT16
157