Yamaha TF5 Service Manual page 153

7-12. LED
The example of a screen of the product test.
7-12-1. LED_PNL
[Contents]
Inspect the LEDs on the PNL circuit board.
[Procedure]
<GUI>
Check LEDs on sheet PNL.
FAIL PASS
Popup dialog as shown in the above fi gure is displayed on the
screen and the target LEDs light up in order.
Check that the target LEDs light up as the order of lighting
mentioned later. Then select [FAIL] or [PASS].
*1 After the last LED is lit, it starts over again from the first
LED.
<Order of lighting>
1 STIN1 SEL
2 STIN2 SEL
3 STIN1 CUE
4 STIN2 CUE
5 STIN1 PEAK
6 STIN2 PEAK
7 STIN1 -20
8 STIN2 -20
9 STIN1 -40
10 STIN2 -40
*1
11 STIN1 ON
12 STIN2 ON
13 STIN1 LEVEL1
: :
25 STIN1 LEVEL13
26 STIN2 LEVEL1
: :
38 STIN2 LEVEL13
7-12-2. LED_PNC
[Contents]
Inspect the LEDs on the PNC circuit board.
[Procedure]
<GUI>
Check LEDs on sheet PNC.
FAIL PASS
The procedure is the same as "7-12-1. LED_PNL".
<Order of lighting>
1 LIBRARY 32 FX2 EDIT
2 HOME 33 FX2 CUE
3 MENU 34 FX2 PEAK
4 SHIFT 35 FX2 -20
5 UDEF A 36 FX2 -40
: : 37 FX2 ON
10 UDEF F 38 FX2 LEVEL1
11 MUTE INPUT : :
12 MUTE FX 50 FX2 LEVEL13
13 FX1 EDIT 51 INPUT1
14 FX1 CUE 52 INPUT2
15 FX1 PEAK 53 OUTPUT
16 FX1 -20
17 FX1 -40
18 FX1 ON
19 FX1 LEVEL1
: :
31 FX1 LEVEL13
TF5/TF3/TF1
54 METER L -60
: :
58 METER L -25
59 METER L -20
: :
64 METER L -3
65 METER L OVER
66 METER R -60
: :
70 METER R -25
71 METER R -20
: :
76 METER R -3
77 METER R OVER
78 CLEAR
153