Advertisement
Quick Links
TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide
Thank you for choosing a Yamaha product.
This guide explains how to update the TF series (TF5, TF3, TF1 and TF-RACK) and the NY64-D firmware.
■ Precautions (Please be sure to read this section first!)
・ The user assumes full responsibility for the update.
・ Please note that the device may be damaged if you fail to follow these instructions properly, or turn off
the device or operate any control/function while the update is in progress.
・ If the update fails, and the device still does not operate correctly even after you execute the update once
again, please contact your Yamaha dealer.
・ Yamaha Corporation owns exclusive copyrights for the TF series firmware, its update program, and the
update guide.
・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, without
permission from the copyright owner.
・ The screen shots in this guide are for use with this update procedure only and may be different from the
actual screen shots.
・ The company names and product names in this document are the trademarks or registered trademarks of
their respective companies.
TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide
1
Advertisement
Related Manuals for Yamaha TF Series
Summary of Contents for Yamaha TF Series
- Page 1 TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide Thank you for choosing a Yamaha product. This guide explains how to update the TF series (TF5, TF3, TF1 and TF-RACK) and the NY64-D firmware. ■ Precautions (Please be sure to read this section first!) ・ The user assumes full responsibility for the update.
- Page 2 The following items are necessary for the update procedure. ● Formatted (FAT32) USB flash drive with 1GB free space In the TF series, memory of 4GB or larger will be formatted in FAT32. For the formatting procedure, refer to “TF5/TF3/TF1/TF-RACK Reference Manual.”...
- Page 3 An "Update firmware?" message will be displayed. NOTE - This display will not appear if the current version of the TF series and the version of the firmware update file are the same. - When only updating the NY64-D, this display will not appear, but the UPDATE window will appear after the splash screen.
- Page 4 DO NOT OPERATE ANY CONTROL OF THE CONSOLE (SWITCHES, KNOBS, FADERS, ETC.) WHILE UPDATING THE FIRMWARE. TF series firmware is transferred (lasting about two minutes). After finishing the file transfer, the TF series reboots, and the splash screen is shown. The UPDATE window appears. TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide...
- Page 5 TF series firmware. (The NY64-D firmware update will be disabled even if the NY64-D firmware update file exists in the USB flash drive.) Finish updating the TF series firmware first, and then perform from Step 5 again. - When the UPDATE window appears, the update operation has already started, the operation has reached 100% completion (Done), or a message prompting to reboot the TF series appears;...
- Page 6 11. Confirm the updated version from the SYSTEM SETUP -> ABOUT window. The firmware update is now complete. NOTE Some firmware versions have new default Presets for Scene or Library. To load the new Presets, the “Initialize All Memories” operation is required. Refer to the “Initialize All Memories” screen of the “MAINTENANCE” screen in the TF-series Reference Manual.
- Page 7 The Dante Firmware Update Manager installer and User Guide are included in the compressed folder with the NY64-D firmware. You can download the latest version from the Yamaha Pro Audio Website. For system requirements, and detailed instructions, refer to the Dante Firmware Update Manager User Guide “AUD-MAN-Firmware_Update_Manager-vX.Xen.pdf”...
- Page 8 3-3. If the update still fails, follow the instructions stated in “If the NY64-D update failed” (page 9) to perform the recovery operation. 3-4. Restart the TF series. The firmware update is now complete.
- Page 9 If the NY64-D firmware is corrupt, the Dante version is displayed as “0.0.0.0 0.0.0.0 0.0.0” in the ABOUT screen of the TF series. When the NY64-D is booted in the failsafe mode, the NY64-D in failsafe mode is shown as “AUD-xxxxxx” with red text in the network grid view of Dante Controller.
- Page 10 TF series with NY64-D. After recovery, restarting the NY64-D takes a while. If you power-off the TF series before restart is completed, the data of the NY64-D will be corrupted, and you will have to perform the recovery once again. Start the...
- Page 11 Described below are the procedures to recover the NY64-D which could not be booted in the failsafe mode. 1. Turn off the power to the TF series console to which the NY64-D is installed. 2. Separate the NY64-D from the Dante network.
- Page 12 Manual Development Department © 2015 Yamaha Corporation Published 1/2017 YJ-D0 TF5/TF3/TF1/TF-RACK/NY64-D Firmware Update Guide...