Yamaha TF5 Service Manual page 139

7. Each Inspection Item
7-1. VERSION
7-1-1. VER_BOOT
[Contents]
The version of the boot program is inspected.
[Procedure]
<GUI>
BOOT Program is Vx.xx ?
FAIL PASS
Popup dialog as shown in the above fi gure is displayed on the
screen. Judge whether it is same as the version described.
If it is same, select [PASS]. If it is not same, select [FAIL].
7-1-2. VER_KERNEL
[Contents]
The version of the kernel program is inspected.
[Procedure]
<GUI>
KERNEL Program is Vx.xx ?
FAIL PASS
Popup dialog as shown in the above fi gure is displayed on the
screen. Judge whether it is same as the version described.
If it is same, select [PASS]. If it is not same, select [FAIL].
7-1-3. VER_MAIN
[Contents]
The version of the main program is inspected.
[Procedure]
<GUI>
MAIN Program is Vx.xx ?
FAIL PASS
Popup dialog as shown in the above fi gure is displayed on the
screen. Judge whether it is same as the version described.
If it is same, select [PASS]. If it is not same, select [FAIL].
7-1-4. VER_MAINCOM
[Contents]
The version of the MAINCOM circuit board is inspected.
[Procedure]
<GUI>
MAINCOM Sheet is xx h ?
FAIL PASS
Popup dialog as shown in the above fi gure is displayed on the
screen. Judge whether it is same as the version described.
If it is same, select [PASS]. If it is not same, select [FAIL].
7-1-5. VER_SUB_PIC
[Contents]
The version of the PIC Sub-CPU is inspected.
[Procedure]
<GUI>
PIC Program is Vx.xx ?
FAIL PASS
Popup dialog as shown in the above fi gure is displayed on the
screen. Judge whether it is same as the version described.
If it is same, select [PASS]. If it is not same, select [FAIL].
TF5/TF3/TF1
139