Page 1
MASSAGE C HAI R Instruction Manuals Luxury Massage Chair MODEL NO.: TC-626 BE SURE TO READ THIS INSTRUCTION MANUALS CAREFULLY AND USE IT PROPERLY AFTER USE, KEEP THIS MANUAL REACH AT ALL TIME FOR FUTURE USE...
Page 2
Thanks for purchasing our massage chair, please read this manual thoroughly especially on The part of safety issues In order to use this massage chair properly, and keep this manual within reach at all time for future use. CONTENTS IMPORTANT SAFETY INSTRUCTIONS ... . 2 SPECIFICATION .
SAFETY INSTRUCTION *Please read this manual carefully before use - The points quoted here are indispensable to using the product properly and to prevent hazards or damages to the user or other people. - After reading through, keep the manual at a safe place where you can consult it whenever necessary. - Please must follow the content of safety part * * Operating surroundings - Don’t use the massage chair under dusty, smeary and anoxic conditions.
Page 4
SAFETY INSTRUCTION *Please read this manual carefully before use - User must follow the instruction of manual while using massage chair . - Do not use massage chair with other medical treatment device to decrease its effect or get injured. - Don’t let kids or pet play around massage chair such as behind the backrest, under footrest…etc.
PRODUCT NAME MASSAGE CHAIR Model No. TC-626 Input Voltage Refer to products label Power Consumption Refer to products label Frequency Refer to products label Net Weight 95kgs Material Unit Carton size 1400(L) *830(W) *1220(H)mm...
PRODUCT INSTALLATION A. Unpack and remove accessories a. Unpack the packaging tape and move upward of the outer box. b. Move down the side board box at the top. Then remove the Styrofoam on each side. c. Remove the accessory box for use. d.
Page 9
C. Install of controller stand a. Take out the controller stand from assessor box and remove the plastic bag. b. Loose the 4 screws of the side board with Phillips screwdriver. c. Match the end of controller stand to the hold on side board. Tighten the 4 screws with Phillips screwdriver.
Page 10
PRODUCT INSTALLATION Notice * Please don’t place the massage chair under the direct sun light and near the heater, will cause discolor and stiffen * Please place cloth or something alike under the massage chair to prevent abrasion and noise *...
Page 11
→Flat backrest pad and head pillow →Plug →Vertical Footrest frame Make sure the product in good condition Make sure have installed the backrest pad and head pillow pad Make sure the power plug no abnormal Make sure the footrest frame is in the vertical position (May lead to breakage and damage at the level state of footrest, when you sit or impose very vigorous strength on it)。...
Page 12
1. Remote Controller Operation Description: FRONT SIDE PAUSE POWER DISPLAY WINDOW ZERO GRAVITY SEATREST PORTION Timing adjustment AUTO PROGRAMS FOOTREST ADJUSTMENT POSITION ADJUSTMENT WIDTH ADJUSTMENT AIR PRESSURE MASSAGE AREA SPEED ADJUSTMENT MANUALS PROGRAMS MASSAGE POSITION AREA ADJUSTMENT. P.11...
Page 13
2. Remote Controller’s Function Description Power ON/OFF. This button for Starting/Stopping the Massage Chair. Press once on this button and the back light of the controller will be lighted, the massage chair is in idle mode. Press this button again to stop all massage functions.
Page 14
Operation Description Adjust chair position function button Keep pushing the button, then it make footrest position keep up and down separately. Keep pushing the button for adjustment the backrest and footrest position. (Note: Backrest and Footrest move together at the same time) Manual features massage area 4 Manuals massage programs,the order sequence is Kneading, Tapping, Pressing, Shiatsu。...
Display function: 1. Auto massage process display. 2. Massage style and strength display. 3. Massage chair backrest, footrest ajustment display. 4. zero gravity position ajustment display. 5. remain time display. 6. pause status display. 7. massage roller width display. 8. spot/ area massage display. 9.
Page 16
About turn off 1. After massage, press the power button on the controller, it will adjust the backrest and footrest to the initial position. * Please make sure it's clear around the chiar in advance. 2. After massage chair stop all the actions, please put controller on the holder.
Care and Maintenance Use only a dry cloth to clean the machine to prevent water seepage. Plastic part, tube and leather could be cleaned by neutral detergents also, but it have to be mop with dry cloth after that. Please mop it with dry cloth softly or clean it with hairbrush. Please keep it dry by time after cleaning.
Page 18
Trouble Shoot * Please confirm the following situations before request for repair. Because the product might be stop working due to the improper operations or other simple reasons, therefore please report to our customer service if the following situations happened. * It's normal when operation sounds occured.
Page 19
- When excessive force, the roller will stop The rollers stop working suddenly. working due to the safety concerned. - Turn off the machine, and turn on it again after 10 seconds. - DO NOT lie on the chair too hard. Please make sure that the plug had plug in the socket properly.