Al690 Installation - Harmar Mobility AL600 Installation And Owner's Manual

Installation - AL690
1. Remove 2nd Row Seating. [Figure 22-1]
2. Installing the Front Leg. The AL690's front leg
must be mounted between 42" and 52" from the
internal surface of the closed side door of the vehicle.
Examine loor area for remaining seat attachment
points that are recessed into the loor. [Figure 22-2]
IMPORTANT:
Attachment Points MUST be FLUSH or LOWER than
the loor.
22
SECTION 2 : INSTALLER
3. Front Leg Attachment
Figure 22-1
3A. If Seat Attachment Points ARE Available: See
Figure 22-3 for mounting diagram.
Figure 22-2
3/8 - 16
3/8 Flat Washer
Nyloc Nut
3/8 - 16
J-HOOK
© 2014 Harmar Mobility, LLC • All Rights Reserved
Figure 22-3
Mounting Bracket
Mounting
Bracket
Hex Head Bolt,
1/2-13 x 4.00"L
Fully Threaded