Harmar Mobility AL600 Installation And Owner's Manual page 25

5. Thread ½-13 nuts onto ½-13 4.00"L bolts
installed previously.
Place ½" lock washer onto bolts.
Place mounting washers onto bolts
Using an assistant, place lift onto bolts through
mounting lange on lift as shown. [Figure 25-1]
TEC0020 17Sep14 P/N: 630-00025 revA
SECTION 2 : INSTALLER
1/2-13 x
4.00"L bolts
If no assistant is available, follow
instructions on page 11 to avoid
injury.
WARNING
AL600 & AL690 Hybrid Installation & Owner's Manual 2014
Installation - AL690
1/2-13
Hex Nut
1/2 Split
Lock Washer
Mounting
Washer
Figure 25-1
Mounting
Washer
1/2 Split
Lock Washer
1/2-13
Hex Nut
( leveling nut )
Place mounting washers on bolts, on top of
mounting ange on lift.
Place 1/2" split lock washers onto bolts.
Thread 1/2-13 nuts onto bolts.
25