Single Person Installation Option
•
We recommend two people install the lift
together. If only one person is available, a
few extra steps make the lift lighter and more
manageable to permit installation.
•
Remove connections at limit switch and remove
power connections at 4-way plug. [Figure 11-1]
•
Remove 4 nuts at tower base . [Figure 11-2]
•
Lift tower straight up to remove from base.
[Figure 11-3]
•
Install base as instructed later in manual.
•
Re-attach tower once the base is mounted
in the vehicle. Re-connect 4-way and limit
switches connectors.
REMOVE 4 NUTS
AT TOWER BASE
TEC0020 17Sep14 P/N: 630-00025 revA
SECTION 2 : INSTALLER
9/16"
Figure 11-2
Preparation
LIFT TOWER
STRAIGHT UP
TO REMOVE
FROM BASE
MOUNTED IN VEHICLE. RE-CONNECT
4 WAY & LIMIT SWITCH CONNECTORS.
Figure 11-3
AL600 & AL690 Hybrid Installation & Owner's Manual 2014
Figure 11-1
INSTALL BASE AS
INSTRUCTED LATER IN MANUAL.
RE-ATTACH TOWER ONCE BASE IS
11