Harmar Mobility AL600 Installation And Owner's Manual page 24

Installation - AL690
Rear Leg Attachment (con't)
4A. If Seat Attachment Points ARE Available: See
Figure 24-1 for mounting diagram.
3/8-16
Nyloc
Nut
3/8 Flat
Washer
24
SECTION 2 : INSTALLER
Figure 24-1
Mounting
Bracket
Pan Head
1/4-20 x 1.50"L
Machine Screw
3/8-16
J-Hook
4B. If Seat Attachment Points are NOT Available:
Look under vehicle in approximate area where leg
will need to be mounted. [Figure 24-2]
Hex Head Bolt,
3/8-16 x 4.00"L
Fully Threaded
Mounting
Bracket
3/8-16
Nyloc
Nut
Drill a pilot hole irst, up from under
the vehicle to ensure nothing will be
damaged.
Find hole from inside vehicle and drill
3/8" hole down through vehicle's loor.
USE EXTREME CAUTION
Avoid Gas Tank, Fuel / Brake /
Electrical Lines
CAUTION
© 2014 Harmar Mobility, LLC • All Rights Reserved
3/8 Flat
Washer
Pan Head
1/4-20 x 1.50"L
Machine Screw
Installation
Washer
Figure 24-2