Harmar Mobility AL600 Installation And Owner's Manual page 16

Installation - AL600
With Removable 3rd Row Seating
5. Thread ½-13 nuts onto ½-13 x 4.00"
L bolts. Place ½" lock washers onto bolts.
Place mounting washers onto bolts.
6. Use an assistant
to place lift onto bolts
through mounting
lange on lift as shown.
If no assistant is available, follow
instructions on page 11 to avoid
injury.
WARNING
16
SECTION 2 : INSTALLER
1/2-13
Hex Nut
1/2 Split Lock
Washer
Mounting
Washer
1/2 Split Lock
Washer
1/2-13
Hex Nut
(LEVELING NUT)
7. Place mounting washers on bolts, on top of
mounting lange on lift. Place ½" lock washers onto
bolts. Thread ½-13 nuts onto bolts.
Mounting
Washer
Mounting
Flange
1/2-13 x 4.00"L bolts
8. Lift front end of lift and install leveling pads as
shown. Place foot plate under leveling pads. Lower
lift and check with a level. Adjust by threading nut
on leveling pads and threading bottom nut under
mounting lange.
L e v e li n g
P a d w /
Ja m N u t
F o o t P la t e
© 2014 Harmar Mobility, LLC • All Rights Reserved