Installation - AL690
1. Remove 2nd Row Seating. [Figure 22-1]
2. Installing the Front Leg. The AL690's front leg
must be mounted between 42" and 52" from the
internal surface of the closed side door of the vehicle.
Examine floor area for remaining seat attachment
points that are recessed into the floor. [Figure 22-2]
IMPORTANT:
Attachment Points MUST be FLUSH or LOWER than
the floor.
22
SECTION 2 : INSTALLER
3. Front Leg Attachment
Figure 22-1
3A. If Seat Attachment Points ARE Available: See
Figure 22-3 for mounting diagram.
Figure 22-2
| www.harmar.com | 800-833-0478
Figure 22-3