Figure - Harmar Mobility AL600 Installation And Owner's Manual

8. Plug hand controller into lift. [Figure 17-1]
Connect to vehicle harness. [Figure 17-2]
BLACK
FROM LIFT
RED
9. Press the DOWN button until the lift's tower has
moved out of the vehicle. [Figure 17-3]

Figure 17-3

TEC0020 17Sep14 P/N: 630-00025 revA
SECTION 2 : INSTALLER
Figure 17-1
From vehicle harness
( installed on page 12)
BLACK
FROM VEHICLE HARNESS
( FROM BATTERY )
RED
Figure 17-2
Installation - AL600
With Removable 3rd Row Seating
10. Attach platform by placing
platform's upright pins into
u-shaped bracket on tower. [Figure
17-4]
11. Thread ½-13 x 1-3/4" L Hex head Bolts and
½" washers into threaded holes as shown. [Figure
17-5] Test full motion of lift into and out of the vehicle.
Be sure lift is level and no obstructions interfere with
platform travel.
Tighten all fasteners from all
steps at this time.
AL600 & AL690 Hybrid Installation & Owner's Manual 2014
Figure 17-4
Figure 17-5
17