Single Person Installation - Harmar Mobility AL600 Installation And Owner's Manual

Single Person Installation Option
• We recommend two people install the lift
together. If only one person is available, a
few extra steps make the lift lighter and more
manageable to permit installation.
• Remove connections at limit switch and remove
power connections at 4-way plug. [Figure 11-1]
• Remove 4 nuts at tower base . [Figure 11-2]
• Lift tower straight up to remove from base.
[Figure 11-3]
• Install base as instructed later in manual.
• Re-attach tower once the base is mounted
in the vehicle. Re-connect 4-way and limit
switches connectors.
REMOVE 4 NUTS
AT TOWER BASE
TEC0020 2018JAN3 P/N: 630-00025 Rev D
SECTION 2 : INSTALLER
9/16"
Figure 11-2
AL600 & AL690 Hybrid Installation & Owner's Manual
Preparation
REMOVE POWER
CONNECTIONS AT
4 WAY PLUG
LIFT TOWER
STRAIGHT UP
TO REMOVE
FROM BASE
REMOVE POWER
CONNECTIONS AT
LIMIT SWITCH
Figure 11-1
INSTALL BASE AS
INSTRUCTED LATER IN MANUAL.
RE-ATTACH TOWER ONCE BASE IS
MOUNTED IN VEHICLE. RE-CONNECT
4 WAY & LIMIT SWITCH CONNECTORS.
Figure 11-3
11